FAQ

Each plant has specific care requirements. For detailed care instructions, please refer to the care guide included in product page or contact us for general advice on watering, light, and soil needs.

Yes, we offer delivery services within UAE. Please check cart page for details on shipping rates, delivery times, and coverage areas.

We accept returns and exchanges within 24 hours of delivery, provided the plant is in its original condition. Please visit our Returns & Exchanges page for more information on how to process a return or exchange.

We accept returns and exchanges within 24 hours of delivery, provided the plant is in its original condition. Please visit our Returns & Exchanges page for more information on how to process a return or exchange.

Once your order has been placed, you will receive a email with updates in every stages

Yes, we offer plant care consultations. You can book a session with one of our experts through our service page.

Overwatering can be a common issue with houseplants, but don’t worry—there are steps you can take to help your plant recover. Here’s what you can do:

1. Assess the Damage: Check the plant for signs of overwatering, like yellowing or wilting leaves, a mushy stem, or root rot. If the roots look brown and slimy, they may be rotting.
2. Improve Drainage: Ensure the pot has drainage holes. If not, consider repotting the plant into one that does. Adding a layer of gravel or rocks at the bottom of the pot can also help improve drainage.
3. Let the Soil Dry Out: Remove the plant from its pot and gently shake off excess soil. Allow the roots to dry out a bit before replanting. If the soil is waterlogged, replace it with fresh, well-draining potting mix.
4. Check for Root Rot: Trim away any rotten roots with sterilized scissors or pruning shears. Be sure to cut back to healthy, firm tissue.
5. Repot the Plant: After addressing the roots and soil, repot the plant in fresh potting mix, ensuring that the new mix is well-draining. You can mix in perlite or sand to improve aeration if needed.
6. Adjust Watering Routine: Make sure to water only when the top inch of soil is dry. Each plant’s needs are different, so adjust according to the specific requirements of your plant.
7. Improve Air Circulation: Place the plant in a well-ventilated area to help the soil dry out faster and reduce the risk of fungal issues.
8. Monitor and Adjust: Keep an eye on your plant’s recovery. If you see improvement, continue with the adjusted watering routine and care practices.

If the plant is severely damaged, it might take some time for it to bounce back, but with patience and the right care, many plants can recover from overwatering.

Water the plant thoroughly, allowing excess water to drain out. Check the soil moisture and resume a regular watering schedule, ensuring you don’t overwater.

Yellow leaves can be a sign of various issues with your plant. Here are some common causes and how to address them:

1. Overwatering: This is one of the most common reasons for yellow leaves. Excess water can lead to root rot and reduce the plant’s ability to take up nutrients. Ensure your plant has proper drainage, and let the top inch of soil dry out before watering again.
2. Underwatering: Conversely, if the plant is too dry, it may also show yellow leaves. Check the soil moisture and water the plant thoroughly if it’s dry.
3. Nutrient Deficiency: Yellowing can indicate a lack of essential nutrients, particularly nitrogen. Consider feeding your plant with a balanced fertilizer appropriate for its type.
4. Improper Light: Plants that receive too much direct sunlight can get scorched, leading to yellowing leaves. Conversely, too little light can also cause yellowing as the plant struggles to photosynthesize. Adjust the plant’s light exposure based on its specific needs.
5. Pests: Check for signs of pests like spider mites, aphids, or mealybugs, which can cause yellowing and other damage. Treat any infestations promptly with appropriate methods.
6. Disease: Fungal or bacterial infections can cause yellowing leaves. Look for other symptoms like spots, mold, or wilting. If you suspect disease, you may need to prune affected leaves and treat the plant with fungicides or antibiotics.
7. Temperature Stress: Extreme temperatures, either too hot or too cold, can stress plants and cause yellowing. Make sure your plant is in an environment with stable temperatures suitable for its species.
8. Soil pH Imbalance: Some plants are sensitive to the pH of their soil. If the pH is too high or too low, it can affect nutrient availability and lead to yellowing. You can test the soil pH and adjust it if necessary.
9. Root Bound: If the plant has outgrown its pot, its roots may be constrained, leading to yellow leaves. If you suspect this, consider repotting the plant into a larger container.

Steps to Take:

• Examine and Adjust Watering: Check if the soil is too dry or too wet and adjust your watering practices.
• Evaluate Light Conditions: Make sure the plant is getting the right amount of light for its type.
• Check for Pests or Disease: Inspect the plant for any signs of pests or disease and treat accordingly.
• Fertilize if Needed: Apply a balanced fertilizer if you suspect a nutrient deficiency.
• Monitor Temperature and Humidity: Ensure the plant is in an environment with stable conditions suitable for its needs.

By identifying and addressing the underlying issue, you can help your plant recover and prevent further yellowing.

Brown leaves can result from overwatering, underwatering, low humidity, excessive light, or nutrient deficiencies. Adjust watering, improve humidity, and ensure proper light conditions to address the issue.

.

Abnormal leaf spots on plants can be caused by a variety of factors, including pests, diseases, and environmental issues. Here’s a breakdown of common causes and how to address them:

1. Fungal Diseases:

• Powdery Mildew: White or grayish powdery spots, usually on the upper surfaces of leaves.
• Leaf Spot Diseases: Circular or irregular spots with a range of colors (brown, black, yellow) often surrounded by a yellow halo.
• Treatment: Remove affected leaves, improve air circulation around the plant, and use fungicides if necessary.

2. Bacterial Diseases:

• Bacterial Leaf Spot: Water-soaked, dark spots that may become sunken and surrounded by yellow halos.
• Bacterial Blight: Larger, irregular spots that may ooze a sticky substance.
• Treatment: Remove and dispose of affected plant parts, avoid overhead watering, and use bactericides if needed.

3. Viral Diseases:

• Viral Infections: Mosaic patterns, ring spots, or streaks of varying colors.
• Treatment: There’s no cure for viral diseases; remove and destroy infected plants to prevent spread.

4. Pests:

• Spider Mites: Tiny, red or brown spots on leaves that may be accompanied by fine webbing.
• Aphids: Small, soft-bodied insects that can cause distorted leaves and may lead to leaf spots.
• Treatment: Use insecticidal soap, neem oil, or other appropriate treatments to control pests.

5. Nutrient Deficiencies:

• Potassium Deficiency: Brown or yellow spots with a scorched appearance, often starting at the leaf edges.
• Calcium Deficiency: Irregular, necrotic spots, often accompanied by distorted leaves.
• Treatment: Use a balanced fertilizer to address deficiencies, based on a soil test if necessary.

6. Environmental Stress:

• Sunburn: Leaf spots or patches that are bleached or scorched from excessive sunlight.
• Chemical Burn: Brown, crispy spots from exposure to fertilizers or pesticides.
• Treatment: Adjust light conditions or reduce chemical use. Ensure proper watering and care.

7. Improper Watering:

• Overwatering: Can cause root rot and lead to yellow or brown leaf spots.
• Underwatering: Can cause dry, crispy spots or leaf edges.
• Treatment: Adjust watering practices to keep the soil consistently moist but not soggy.

8. Soil Problems:

• Poor Drainage: Waterlogged soil can lead to root problems and leaf spots.
• Soil Compaction: Can restrict root growth and nutrient uptake, leading to leaf issues.
• Treatment: Improve soil drainage and aeration, and consider repotting if necessary.

Steps to Address Abnormal Leaf Spots:

1. Identify the Cause: Examine the spots carefully and consider other symptoms to diagnose the issue.
2. Remove Affected Leaves: Prune away damaged or diseased leaves to prevent spread and improve plant health.
3. Improve Plant Care: Adjust watering, light, and humidity levels as needed.
4. Use Treatments: Apply appropriate fungicides, bactericides, or insecticides if necessary.
5. Monitor and Adjust: Keep an eye on the plant’s condition and make further adjustments based on its response.

By addressing the underlying cause and providing proper care, you can help your plant recover from leaf spot issues and maintain its health.

Brown or black crispy leaves on a plant can be alarming, but understanding the underlying cause can help you address the issue effectively. Here are some common causes and solutions:

1. Underwatering:

• Symptoms: Leaves may become brown, crispy, and dry, especially at the edges or tips.
• Solution: Water the plant thoroughly, ensuring that the soil is evenly moist. Check the soil moisture regularly and adjust your watering schedule as needed.

2. Overwatering:

• Symptoms: Brown or black spots that can appear soggy or mushy, often accompanied by a foul smell from root rot.
• Solution: Ensure the plant has proper drainage and let the soil dry out between waterings. Repot the plant in fresh, well-draining soil if needed.

3. Sunburn or Excessive Light:

• Symptoms: Leaves may develop brown or black, scorched patches, often on the side facing the light.
• Solution: Move the plant to a location with indirect light or provide some shading to protect it from direct sunlight.

4. Nutrient Deficiencies:

• Symptoms: Brown or black leaf tips and edges, sometimes with a crispy texture, can indicate deficiencies in nutrients like potassium or calcium.
• Solution: Use a balanced fertilizer to address nutrient imbalances. Conduct a soil test if you’re unsure which nutrients are lacking.

5. Pests:

• Symptoms: Insects like spider mites or aphids can cause damage that results in brown, crispy patches on leaves.
• Solution: Inspect the plant for pests and treat with insecticidal soap, neem oil, or other appropriate pest control methods.

6. Disease:

• Symptoms: Fungal or bacterial diseases can cause black or brown spots that may eventually turn crispy.
• Solution: Remove affected leaves and use appropriate fungicides or bactericides. Improve air circulation around the plant to prevent further spread.

7. Temperature Stress:

• Symptoms: Brown or black, crispy leaves can result from exposure to extreme temperatures, either too hot or too cold.
• Solution: Ensure the plant is kept in a stable environment within its preferred temperature range. Avoid placing it near drafts, heaters, or air conditioners.

8. Chemical Damage:

• Symptoms: Brown or black spots or edges may occur if the plant is exposed to excessive fertilizers, pesticides, or other chemicals.
• Solution: Flush the soil with water to remove excess chemicals and avoid applying fertilizers or pesticides too frequently.

9. Soil Issues:

• Symptoms: Soil that is too compacted or poorly draining can lead to root problems and brown, crispy leaves.
• Solution: Improve soil drainage by repotting the plant in a well-draining mix. Ensure the pot has adequate drainage holes.

Steps to Address Brown or Black Crispy Leaves:

1. Identify the Cause: Examine the leaves and overall plant condition to determine the most likely cause of the issue.
2. Adjust Care Practices: Modify watering, lighting, and temperature conditions based on the identified problem.
3. Remove Affected Leaves: Prune away damaged leaves to improve the plant’s appearance and prevent potential disease spread.
4. Monitor Plant Health: Keep a close eye on the plant to see if it responds positively to the changes and treatments.

By diagnosing the problem and adjusting your care routine, you can help your plant recover and prevent further damage.

Gnats flying around your plants are likely fungus gnats, which are small, flying insects attracted to moist soil. Here’s a closer look at why they might be present and how you can deal with them:

Causes of Fungus Gnats

1. Overwatered Soil:

• Cause: Fungus gnats thrive in consistently moist soil, which provides a perfect environment for their larvae to develop.
• Solution: Allow the top inch of soil to dry out between waterings. Ensure the pots have good drainage and avoid letting them sit in standing water.

1. Organic Matter:

• Cause: Decaying plant material or organic matter in the soil can attract gnats, as it provides food for their larvae.
• Solution: Remove any dead plant material from the soil surface and consider using a sterile potting mix.

1. Poor Soil Drainage:

• Cause: Soil that doesn’t drain well can become waterlogged, creating an ideal environment for gnats.
• Solution: Use well-draining potting soil and ensure your pots have drainage holes. Adding perlite or sand to the soil can improve drainage.

How to Control and Eliminate Fungus Gnats

1. Dry Out the Soil:

• Allow the soil to dry out more between waterings. Fungus gnat larvae need moist conditions to survive, so drying the soil can help kill them off.

1. Use Yellow Sticky Traps:

• Place yellow sticky traps near your plants. These traps attract adult gnats, helping to reduce their numbers.

1. Apply Beneficial Nematodes:

• Beneficial nematodes are microscopic worms that prey on fungus gnat larvae. They can be applied to the soil to target and kill the larvae.

1. Use Soil Drench:

• Neem Oil: Neem oil can be used as a soil drench to kill larvae. Follow the instructions on the product for proper application.
• Hydrogen Peroxide Solution: A mixture of 1 part hydrogen peroxide to 4 parts water can be used as a soil drench to kill larvae. Water the soil with this solution to help control the infestation.

1. Improve Air Circulation:

• Increase air circulation around your plants by using a fan. Good airflow helps the soil dry out more quickly and reduces the conditions that favor gnats.

1. Change the Soil:

• If the infestation is severe, you might need to repot the plant with fresh, sterile potting soil. Be sure to thoroughly clean the pot before repotting.

1. Avoid Overwatering:

• Review and adjust your watering practices to prevent the soil from staying too wet. Use pots with good drainage and water only when necessary.

1. Check for Other Issues:

• Ensure that there are no other issues with the plant’s care that might contribute to soil moisture problems.

Prevention Tips

• Water Wisely: Avoid overwatering and ensure that the soil has adequate drainage.
• Maintain Cleanliness: Keep the area around your plants clean and remove any fallen leaves or debris.
• Monitor Regularly: Keep an eye on your plants and soil conditions to catch any potential issues early.

By addressing the root causes and implementing these control measures, you can effectively manage and reduce the population of fungus gnats around your plants.

Repotting plants is an essential part of plant care that ensures they have enough space to grow and thrive. Here are key indicators and guidelines to help you determine when it’s time to repot your plants:

Signs That It’s Time to Repot:

1. Root Bound:

• Symptoms: Roots growing out of the drainage holes, circling the bottom of the pot, or visible roots on the soil surface.
• Action: If the roots are tightly bound and have no room to expand, it’s time to repot into a larger container.

1. Stunted Growth:

• Symptoms: The plant shows slow or stagnant growth despite proper care.
• Action: Stunted growth can indicate that the plant has outgrown its pot and needs more space.

1. Soil Degradation:

• Symptoms: Soil appears compacted, dry out too quickly, or has poor drainage.
• Action: Old soil can become depleted of nutrients and less effective at retaining moisture, so repotting with fresh potting mix can help.

1. Water Drainage Issues:

• Symptoms: Water pools on the surface or takes too long to drain, leading to potential root rot.
• Action: Poor drainage can be a sign that the soil is too compacted or that the pot is too small.

1. Top-Heavy Plant:

• Symptoms: The plant looks top-heavy or unstable in its current pot.
• Action: Repotting into a more stable, larger pot can help balance the plant and support its growth.

1. Salt or Mineral Build-Up:

• Symptoms: White or crusty deposits on the soil surface or around the pot’s rim.
• Action: This build-up can affect plant health and drainage. Repotting with fresh soil can help reduce these issues.

1. New Growth is Sparse:

• Symptoms: New leaves or stems appear sparse or less vibrant.
• Action: This could indicate a need for fresh soil or more space for root growth.

When to Repot:

1. Spring or Early Summer:

• Best Time: Spring or early summer is typically the best time to repot most plants. This allows them to settle into their new pot and take advantage of the growing season.

1. After Flowering or Dormancy:

• Specific Timing: For flowering plants, it’s often best to repot after blooming or during the plant’s dormant period to minimize stress.

1. Every 1-2 Years:

• Routine Repotting: Some plants benefit from repotting every 1-2 years to refresh the soil and provide room for growth.

Steps to Repot a Plant:

1. Choose a New Pot:

• Select a pot that is 1-2 inches larger in diameter than the current one. Ensure it has drainage holes.

1. Prepare Fresh Soil:

• Use fresh, well-draining potting mix suitable for your plant type.

1. Remove the Plant:

• Gently remove the plant from its current pot. Loosen any tightly bound roots.

1. Inspect and Prune:

• Inspect the roots for signs of rot or disease and prune away any unhealthy sections.

1. Add Soil:

• Place some fresh soil in the bottom of the new pot, position the plant, and fill in around it with more soil. Ensure the plant is at the same depth as it was in the old pot.

1. Water Thoroughly:

• Water the plant well after repotting to help it settle in and reduce transplant shock.

1. Place in a Suitable Location:

• Keep the repotted plant in a spot with appropriate light and avoid direct sunlight until it acclimates.

By following these guidelines, you can help ensure that your plant has the space and resources it needs to continue growing and thriving.

Changing your plant’s potting mix is important for maintaining soil health and ensuring your plant’s continued growth. However, the frequency of changing the potting mix depends on several factors, including the type of plant, the condition of the soil, and the plant’s overall health. Here’s a general guideline to help you decide when to refresh your plant’s potting mix:

General Guidelines for Changing Potting Mix:

1. Every 1-2 Years:

• Routine Refresh: For many indoor plants, changing the potting mix every 1-2 years is a good practice. This helps refresh the nutrients in the soil and ensures good drainage.

1. When Repotting:

• During Repotting: If you are repotting your plant into a larger pot, it’s an ideal time to replace the old potting mix with fresh soil. This prevents the plant from being confined to old, depleted soil and helps with root growth.

1. When Soil Quality Declines:

• Soil Degradation: If the soil becomes compacted, waterlogged, or poorly draining, it’s a sign that the potting mix needs to be changed. Old soil can lose its structure and ability to retain moisture and nutrients effectively.

1. After Pest or Disease Issues:

• Pest or Disease Infestation: If your plant has had issues with pests or diseases, replacing the potting mix can help prevent recurrence and provide a fresh start.

1. If You Notice Salt or Mineral Build-Up:

• Salt Crystals: If there are noticeable salt or mineral deposits on the soil surface or around the pot’s rim, it’s a good idea to replace the potting mix to remove accumulated salts.

1. Signs of Root Bound:

• Root Issues: If the plant’s roots are visibly growing out of the drainage holes or circling the pot, repotting with fresh mix is necessary. This often occurs every 1-2 years, depending on the plant’s growth rate.

How to Change Potting Mix:

1. Prepare Fresh Potting Mix:

• Use a fresh, high-quality potting mix suitable for your plant type. Consider using a mix with good drainage properties if needed.

1. Remove the Plant:

• Gently remove the plant from its current pot. Shake off or gently brush away old soil from the roots. Inspect the roots for signs of rot or disease and trim any unhealthy sections.

1. Clean the Pot:

• If you’re reusing the same pot, clean it thoroughly to remove any old soil, pests, or disease remnants.

1. Repot the Plant:

• Add a layer of fresh potting mix to the bottom of the pot, position the plant, and fill in around the sides with more mix. Ensure the plant is at the same depth as it was previously.

1. Water Thoroughly:

• Water the plant well after repotting to help the new soil settle around the roots and reduce transplant shock.

1. Monitor the Plant:

• Keep an eye on the plant’s condition after changing the mix. Ensure it receives the appropriate light, water, and care to help it acclimate to the new soil.

Regularly assessing the condition of your plant’s soil and making adjustments as needed will help keep your plants healthy and thriving.

Deciding whether to repot or fertilize your plant depends on the specific issues you’re observing and the needs of your plant. Here’s a guide to help you make the decision:

When to Repot:

1. Root Bound:

• Signs: Roots are growing out of the drainage holes, circling the pot, or visible on the soil surface.
• Action: Repot into a larger container to provide more space for growth.

1. Stunted Growth:

• Signs: The plant is not growing as expected despite proper care.
• Action: Repotting can help if the plant has outgrown its pot or if the soil has become depleted.

1. Soil Degradation:

• Signs: Soil is compacted, poorly draining, or has significant salt/mineral build-up.
• Action: Replace the old soil with fresh potting mix during repotting.

1. Top-Heavy or Unstable Plant:

• Signs: The plant is leaning or appears unstable in its current pot.
• Action: Repot into a more stable or larger pot to help balance the plant.

1. Pests or Disease:

• Signs: Persistent pests or diseases that may be lingering in the soil.
• Action: Repot with fresh soil and treat any pest or disease issues.

When to Fertilize:

1. Nutrient Deficiency Symptoms:

• Signs: Yellowing leaves, poor growth, or other specific deficiencies (e.g., brown leaf edges due to potassium deficiency).
• Action: Fertilize with an appropriate balanced or specific nutrient formula.

1. Growth Phase:

• Signs: The plant is actively growing (typically in spring and summer).
• Action: Fertilize to support healthy growth and flowering. Reduce or stop fertilizing during dormancy (usually fall and winter).

1. Routine Care:

• Signs: Regular feeding schedule for plants that benefit from ongoing fertilization.
• Action: Follow a fertilization routine based on the plant’s needs and the type of fertilizer used.

Steps to Decide:

1. Evaluate the Plant’s Health:

• Check the Roots: If you suspect root-bound issues or see roots growing out of the pot, repotting is likely needed.
• Examine the Soil: If the soil is degraded or compacted, repotting can refresh the growing medium.

1. Assess Growth Patterns:

• Growth Stagnation: If growth is sluggish but the soil seems fine and the plant isn’t root-bound, consider fertilizing to provide essential nutrients.

1. Inspect for Pests/Diseases:

• Pests or Diseases: If there’s an ongoing pest or disease issue, repotting with fresh soil can help address the problem.

1. Consider the Plant’s Stage:

• Growing vs. Dormant: During the growing season, fertilizing can boost growth, while repotting is more urgent if the plant needs more space or fresh soil.

Combination Approach:

In some cases, a combination of both actions might be needed. For example:

• Repotting in Combination with Fertilizing: If you’re repotting a plant that’s been root-bound or has degraded soil, you can also fertilize it after repotting to give it a nutrient boost.

By carefully assessing your plant’s condition and needs, you can make an informed decision on whether repotting or fertilizing—or both—is the best course of action.

Yes, many plants can thrive under artificial light if it provides the right spectrum, intensity, and duration for the plant’s needs.

Anthurium plants are known for their striking flowers and glossy leaves, but they can be sensitive to changes in their environment or care. Yellowing or browning of Anthurium leaves can be caused by various factors. Here’s a breakdown of common causes and their solutions:

1. Assess the Situation: Check for signs of overwatering, underwatering, light exposure, or temperature extremes.
2. Adjust Care: Modify watering practices, improve light conditions, adjust humidity levels, and provide appropriate nutrients.
3. Monitor the Plant: Keep an eye on the plant’s response to changes and continue to adjust care as needed.

By diagnosing and addressing the specific cause of yellowing or browning leaves, you can help your Anthurium recover and maintain its vibrant health.

Your Peace Lily may not be flowering due to insufficient light, improper watering, nutrient deficiencies, or environmental stress. Ensure it receives bright, indirect light, consistent moisture, and appropriate fertilization.

Promotes Even Moisture Distribution: It ensures consistent moisture throughout the soil.

Prevents Overwatering: It allows plants to absorb water gradually, reducing the risk of waterlogging and root rot.

Encourages Deep Root Growth: Roots grow downward toward the water source, promoting a stronger root system.

Reduces Soil Compaction: It avoids disturbing the soil surface and helps prevent soil compaction.

Minimizes Leaf Wetting: It keeps leaves dry, reducing the risk of fungal diseases.

Snake plant leaves turn yellow due to:

Nutrient Deficiency: Lack of essential nutrients can cause yellowing.

Overwatering: Excess moisture can cause root rot and yellowing.

Underwatering: Insufficient water can stress the plant and cause yellowing.

Poor Drainage: Waterlogged soil can lead to yellow leaves.

Low Light: Insufficient light can affect the plant’s health and color.

The best way to water an orchid is:

Water Less in Winter: Reduce watering frequency during the cooler months.

Water Thoroughly: Soak the potting medium until water drains out of the bottom.

Let It Dry: Allow the top inch of the medium to dry before watering again.

Use Room Temperature Water: Water with lukewarm water to avoid shocking the plant.

To maintain an indoor fern:

Use Well-Draining Soil: Plant in a potting mix designed for ferns or a well-draining mix.

Keep Humid: Ensure high humidity by misting regularly or using a humidity tray.

Provide Indirect Light: Place in bright, indirect light; avoid direct sunlight.

Water Consistently: Keep the soil consistently moist, but not waterlogged.

Maintain Temperature: Keep in a temperature range of 60-75°F (15-24°C), avoiding drafts.

Fertilization in planters or containers is crucial because:

Enhances Health: Improves overall plant health and resilience.

Nutrient Supply: It replenishes essential nutrients that deplete over time in limited soil.

Promotes Growth: Supports healthy growth, flowering, and fruiting.

Prevents Deficiencies: Avoids nutrient deficiencies that can stunt growth or cause plant stress.

For encouraging blooming:

Adjust Temperature: Keep plants in their preferred temperature range and avoid extreme conditions.

Provide Adequate Light: Ensure plants get the right amount of bright, indirect light.

Fertilize Regularly: Use a balanced or flowering-specific fertilizer.

Maintain Proper Watering: Water consistently without over or underwatering.

Ensure Good Drainage: Use well-draining soil and pots with drainage holes.